LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2000 >> Eclipse GS, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock/Traction Control >> Component Tests >> Hydraulic Unit Relays >> Valve Relay

Valve Relay

  1. Remove valve relay. Using a DVOM, check resistance between relay terminals No. 85 and 86. See Figure . Resistance should be 60-120 ohms.
  2. Check for continuity between relay terminals No. 30 and 87a. Continuity should exist. Check for continuity between relay terminals No. 30 and 87. Continuity should not exist.
  3. Apply battery voltage to relay terminal No. 85, and ground terminal No. 86. Check for continuity between terminals No. 30 and 87. Continuity should exist. Check for continuity between terminals No. 30 and 87a. Continuity should not exist. If relay does not test as specified, replace relay.
scientia non olet · About LEMON Manuals