LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2000 >> Diamante LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Circuit Tests >> Scan Tool Will Not Communicate >> No Communication With All Systems

No Communication With All Systems

  1. Check voltage between ground and OBD-II Data Link Connector (OBD-II DLC) terminal No. 16. If battery voltage does not exist, repair connectors and/or wiring between OBD-II DLC and power supply. If battery voltage exists, go to next step.
  2. Check continuity between ground and OBD-II DLC terminals No. 4 and 5. If continuity exists, repair or replace scan tool as necessary. If continuity does not exist, repair wiring between ground and OBD-II DLC.
scientia non olet · About LEMON Manuals