Wheel Speed Sensor: Installation

1. Install speed sensor bracket if removed. Sensor mounting brackets are not interchangeable from side-to-side. Each bracket is stamped with an "FR" indicating front bracket, and an "R" or "L" to indicate right or left.
2. Temporarily install speed sensor. Route speed sensor wiring harness in its original location, and ensure no twist exists in harness. Adjust wheel speed sensor-to-rotor gap. See WHEEL SPEED SENSOR  under ADJUSTMENTS. To complete installation, reverse removal procedure.

Temporarily install speed sensor. Route speed sensor wiring harness in its original location, and ensure no twists exist in harness. Ensure sensor harness is not in contact with trailing arm. Reverse removal procedure to complete installation.