LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1998 >> Galant ES, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Component Tests >> Wheel Speed Sensor >> Sensor Resistance Test

Sensor Resistance Test

  1. Before testing sensor resistance, ensure pole piece-to-wheel speed sensor tip is clean. Check wheel sensor pole piece for damage. Replace pole piece if damaged.
  2. Disconnect sensor connector. Inspect sensor wiring harness for broken and pinched wires. Repair or replace harness as necessary. Using a DVOM, check sensor resistance across wiring connector terminals. Resistance should be 1000-2000 ohms. If resistance is not as specified, replace sensor. If resistance is as specified, go to GROUND CIRCUIT TEST.
scientia non olet · About LEMON Manuals