LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1997 >> Montero LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Component Tests >> Wheel Speed Sensor (WSS) >> WSS Resistance Test

WSS Resistance Test

  1. Before testing WSS resistance, ensure pole piece-to-WSS tip is clean. Check WSS pole piece for damage. If pole piece is damaged, replace WSS.
  2. Disconnect WSS connector. Inspect WSS wiring harness for broken and pinched wires. See WIRING DIAGRAMS  . Repair harness as necessary. If harness is okay, go to next step.
  3. Using ohmmeter, check resistance across WSS terminals. Resistance for front WSS should be 1170-1350 ohms. Resistance for rear WSS should be 1300-1500 ohms. If resistance is as specified, go to GROUND CIRCUIT TEST. If resistance is not as specified, replace WSS.
scientia non olet · About LEMON Manuals