LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1997 >> Montero LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Adjustments >> Wheel Speed Sensor (WSS) >> Front WSS-To-Rotor Gap Adjustment

Front WSS-To-Rotor Gap Adjustment

  1. Raise and support vehicle. Remove wheel(s). Inspect sensor pole piece for damage. Repair if necessary. If sensor pole piece is okay, check WSS-to-rotor gap.
  2. Using a feeler gauge, check clearance between sensor pole and rotor tooth surface. See Fig 1 . Front WSS sensor clearance should be .008-.390" (0.2-1.0 mm). If clearance is not as specified, loosen sensor mounting bolt. Adjust sensor position until clearance is within specification. Tighten sensor mounting bolt to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Checking Front WSS-To-Rotor Gap
G98F12075Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals