LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1997 >> Montero LS >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Component Testing >> Closed Throttle Position Switch Test & Throttle Position Sensor >> Throttle Position Sensor

Throttle Position Sensor

  1. Disconnect sensor connector. Resistance between terminals No. 1 and 4 should be 3500-6500 ohms. Use an analog ohmmeter to measure resistance between terminals No. 1 and 3. SeeFigure.
  2. Slowly open throttle valve to wide open throttle. Resistance should change smoothly as throttle is opened. Replace throttle position sensor if it does not test correctly.
scientia non olet · About LEMON Manuals