Common Specs & Procedures
3000GT COMMON SPECS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM SPECIFICATIONS | ||
| Torque | |||
| Automatic | N/A | ||
| Manual | TORQUE SPECIFICATIONS | ||
| Axle Shaft/Bearing Lock Nut/Drive Axle Nut (Front) | 166-188 Ft. Lbs. (225-255 N.m) | ||
| Battery | |||
| Non-Turbo | CAPACITIES | ||
| Turbo | CAPACITIES | ||
| Brakes | |||
| Bleeding Sequence | |||
| With ABS | BLEEDING BRAKE SYSTEM | ||
| Without ABS | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | BRAKE SYSTEM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | 95 Amps | ||
| Torque | N/A | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 11-15 psi | ||
| Thermostat R & I | THERMOSTAT | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | |||
| Non-Turbo | ENGINE COMPRESSION | ||
| Turbo | ENGINE COMPRESSION | ||
| Oil Pressure | Oil pressure should be at least 11 psi (.8 kg/cm2 ) at idle and engine oil temperature of 167-194°F (75-90°C). | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate (Drive Plate) Torque | 55 Ft. Lbs. (75 N.m) | ||
| Fuel System | |||
| Pressure Specification | |||
| Non-Turbo | N/A | ||
| Turbo | FUEL PUMP | ||
| Fuel Pressure Test Procedure | |||
| Non-Turbo | PRESSURE TESTING | ||
| Turbo | PRESSURE TESTING | ||
| Fuel Filter | |||
| Non-Turbo | FUEL FILTER | ||
| Turbo | FUEL FILTER | ||
| Ignition | |||
| Firing Order & Cylinder Identification | |||
| Non-Turbo | FIRING ORDER | ||
| Turbo | FIRING ORDER | ||
| Ignition Wires (Resistance) | |||
| Non-Turbo | HIGH TENSION WIRE RESISTANCE | ||
| Turbo | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | |||
| Non-Turbo | FIRING ORDER | ||
| Turbo | FIRING ORDER | ||
| Spark Plug | |||
| Non-Turbo | SPARK PLUGS | ||
| Turbo | SPARK PLUGS | ||
| Starting | |||
| Starter Specifications | STARTER SPECIFICATIONS | ||
| Torque Specifications | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 87-101 Ft. Lbs. (118-137 N.m) | ||