LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1996 >> Montero SR, V4AW2 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - 3.0L V6 >> Ignition Checks >> Hall Effect & Optical Ignition >> Power Transistor

Power Transistor

  1. Disconnect power transistor connector. Using a 1.5-volt dry cell battery, connect negative end of 1.5-volt battery to terminal No. 2 of power transistor and positive end to terminal No. 1. See Figure .
  2. Using an analog ohmmeter, check for continuity between terminals No. 2 and 3 of power transistor. Continuity should exist. With positive end of 1.5-volt battery disconnected, there should be no continuity. Replace power transistor if it fails test.
scientia non olet · About LEMON Manuals