LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1996 >> Montero LS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - 3.0L V6 >> Ignition Checks >> DISTRIBUTORLESS Ignition System (Dis) >> Ignition Coil Resistance

Ignition Coil Resistance

  1. On Montero 3.0L 24-valve, measure primary coil resistance between terminal No. 1 (power terminal) and each individual coil terminal using a DVOM. See Fig 1 . To check secondary coil resistance, measure resistance between towers of each individual coil.
    Fig 1: Ignition Coil Connector Terminal ID (V6 - DIS - Montero 3.0L - 24-Valve)
    G95B31030Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
  2. Replace coil if primary and secondary coil resistances are not within specification. See IGNITION COIL RESISTANCE  table.
    IGNITION COIL RESISTANCE - Ohms @ 68°F (20°C)

    Application Primary Secondary
    Montero - 24-Valve .67-.81 11,300-15,300
scientia non olet · About LEMON Manuals