Test 9B - Bus Short To Ground
WARNING: This page is about a different car, the 1995 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For connector terminal identification, see CONNECTOR IDENTIFICATION . For wiring diagrams, see WIRING DIAGRAMS - 3.0L
article in ENGINE PERFORMANCE. After each repair, perform TEST VER-1.
CAUTION:
Always turn ignition switch to OFF position prior to disconnecting or connecting any module connector.
If scan tool does not display BUS SHORT TO GROUND in TEST 9A step 3), replace controller anti-lock brakes.