LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1995 >> Montero LS, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Self-Diagnostic System >> Retrieving DTCS >> Using Voltmeter (1995)

Using Voltmeter (1995)

  1. To retrieve stored DTCs, locate Data Link Connector (DLC) located under left side of dash. Turn ignition off. Connect analog voltmeter between DLC terminal No. 8 (ABS) and either terminal No. 4 or 5 (ground). See Fig 1. Go to next step.
  2. Start engine. Stored DTCs will be indicated by sweeps of voltmeter needle. Long sweeps indicate first digit of DTC; short sweeps indicate second digit. If more than one fault is present, lowest number DTC will be given first. After DTC(s) has been retrieved, test indicated component and/or related circuit (if necessary). See DTC DEFINITION . See appropriate DTC under CIRCUIT TESTS .
Fig 1: Identifying Data Link Connector Terminals (1995)
G94D46584Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals