LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1995 >> Eclipse RS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.0L Turbo >> Diagnostic Tests >> Code P1300: Ignition Timing Adjustment Circuit Fault

Code P1300: Ignition Timing Adjustment Circuit Fault

NOTE: For component terminal identification, see TERMINAL IDENTIFICATION  in this article. For appropriate WIRING DIAGRAMS, see WIRING DIAGRAMS  section.

Turn ignition on. Measure voltage between ignition timing adjustment terminal and ground. If voltage is 4.0-5.2 volts, replace PCM. If voltage is not 4.0-5.2 volts, check PCM connector and wiring harness between timing adjustment terminal and PCM. If connector and wiring is okay, replace PCM.

scientia non olet · About LEMON Manuals