LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1995 >> Eclipse RS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.0L Non-Turbo >> Diagnostic Tests >> Code 39: No Change In Map From Start To Run

Code 39: No Change In Map From Start To Run

NOTE: For component terminal identification, see TERMINAL IDENTIFICATION  in this article. For appropriate WIRING DIAGRAMS, see WIRING DIAGRAMS  section.
  1. Disconnect MAP sensor connector. Check continuity between MAP sensor connector terminal No. 1 (Black/Green wire) and ground. If continuity exists, go to next step. If continuity does not exist, check PCM connector, junction connector and wiring harness between PCM and MAP sensor connector.
  2. Check MAP sensor connector, PCM connector and wiring harness between PCM and MAP sensor connector. If wiring and connectors are okay, replace MAP sensor.
scientia non olet · About LEMON Manuals