LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1995 >> Eclipse RS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.0L Non-Turbo >> Diagnostic Tests >> Code 35: No Vehicle Speed Sensor Signal >> Manual Transmission

Manual Transmission

  1. Disconnect Vehicle Speed Sensor (VSS) connector. Turn ignition on. Measure voltage between VSS connector terminal No. 1 (Yellow wire) and ground. If voltage is not 8.5-9.5 volts, go to step 3).
  2. Check continuity between VSS connector terminal No. 2 (Black/Green wire) and ground. If continuity exists, go to step 3). If continuity does not exist, check PCM connector, junction connectors and wiring harness between PCM and VSS connector.
  3. Check VSS connector, PCM connector, junction connector and wiring harness between PCM and VSS connector. If wiring and connectors are okay, using MUT II scan tool, perform SENSOR READ TEST No. 65 (vehicle speed sensor). Test drive vehicle. If vehicle speed is not displayed on scan tool, replace speed sensor.
scientia non olet · About LEMON Manuals