LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1995 >> 3000GT SL, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Engine Controls - Basic Testing - 1.5L) >> Ignition Checks >> Hall Effect & Optical Ignition >> Power Transistor

Power Transistor

WARNING: This page is about a different car, the 1995 Mitsubishi Mirage and 1995 Eagle Summit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect power transistor connector. Using a 1.5-volt dry cell battery, connect negative end of 1.5-volt battery to terminal No. 5 of power transistor and positive end to terminal No. 6. See Fig 1 .
  2. Using an analog ohmmeter, check for continuity between terminals No. 5 and 12 of power transistor. Continuity should exist. With positive end of 1.5-volt battery disconnected, there should be no continuity. Replace power transistor if it fails test.
    Fig 1: Power Transistor Connector ID (Except DIS - All Models)
    G95I31037Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
scientia non olet · About LEMON Manuals