LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1995 >> 3000GT Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Engine Controls - System/Component Tests - 2.4L) >> Idle Control System >> Electrical Load Switch >> Galant

Electrical Load Switch: Galant

WARNING: This page is about a different car, the 1995 Mitsubishi Pickup, 1995 Mitsubishi Galant, 1995 Mitsubishi Expo, 1995 Eagle Summit Wagon, and 1995 Eagle Summit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect PCM connector. Proceed to the POWERTRAIN CONTROL MODULE (PCM) LOCATION  table under COMPUTERIZED ENGINE CONTROLS. Using DVOM, measure input voltage between terminal No. 24 and vehicle ground. Turn headlights on. Measure voltage. Turn headlights off.
  2. Turn defogger on. Measure voltage. Turn defogger off. Depress brake pedal (except Galant). Measure voltage. Release brake pedal. If any measurement is less than battery voltage, check and repair malfunctioning circuit. See appropriate WIRING DIAGRAM under WIRING DIAGRAMS  section.
scientia non olet · About LEMON Manuals