LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1995 >> 3000GT Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Instrument Panel) >> Component Testing >> Temperature Gauge >> Sensor Resistance Test

Sensor Resistance Test

WARNING: This page is about a different car, the 1996 Mitsubishi Eclipse and 1995 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Coolant Temperature Sensor (CTS) from engine. See COOLANT TEMPERATURE SENSOR LOCATION  . Place sending unit in 158°F (70°C) water. Check sensor resistance using ohmmeter.
  2. CTS resistance should be 90-117 ohms. If CTS resistance is okay, go to GAUGE RESISTANCE TEST. Replace CTS if resistance is not as specified.
COOLANT TEMPERATURE SENSOR LOCATION

Model Location
Eclipse On Intake Manifold
scientia non olet · About LEMON Manuals