LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1995 >> 3000GT Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Instrument Panel) >> Component Testing >> Temperature Gauge >> Circuit Test

Circuit Test

WARNING: This page is about a different car, the 1996 Mitsubishi Eclipse and 1995 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect temperature sender wire from sending unit. Connect a 12-volt, 3.4-watt test light between connector terminal and ground. Turn ignition switch to ON position.
  2. If test light flashes and temperature gauge needle moves, go to SENSOR RESISTANCE TEST. If test light does not flash or gauge needle does not move, repair wiring to sending unit.
scientia non olet · About LEMON Manuals