LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1994 >> Montero LS, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power Recirculating Ball >> Overhaul >> Power Steering Pump >> Reassembly

Power Steering Pump: Reassembly

  1. Lubricate "O" rings and internal pump components with ATF before reassembly. Install flow control valve spring and control valve in housing.
  2. Install and tighten pressure connector. Depress control valve to check for smooth operation. Apply grease to lip of oil seal. Install oil seal into pump body. Install pulley assembly into pump body.
  3. Install rotor to pulley assembly with punch mark at pump cover side. Install snap ring. Lift rotor to ensure that snap ring is in countersunk part of shaft. Align cam ring dowel holes and install cam ring with punch mark on pump body side.
  4. Apply transmission fluid to vanes, and install vanes onto rotor with rounded edges outward. Install "O" ring, cam case and pump cover. Install and tighten suction connector.
scientia non olet · About LEMON Manuals