4WD Indicator Switches
All switches are mounted to transfer case. See Figure . Switches use single harness lead and ground to transfer case. See 4WD INDICATOR SWITCH CONTINUITY CHECK table. Ensure all appropriate grounding straps are connected to vehicle body or frame.
4WD INDICATOR SWITCH CONTINUITY CHECK
| Switch (1) | Transfer Control Lever Position | Specification | ||
|---|---|---|---|---|
| Center Differential Lock Detection Switch | 4H | No Continuity | ||
| 4HLc | Continuity | |||
| Center Differential Lock Operation Detection Switch | 4H | No Continuity | ||
| Operation Detection Switch | 4HLc | Continuity | ||
| 4WD Operation Detection Switch | 2H | No Continuity | ||
| 4H | Continuity | |||
| HI/LO Detection Switch | 4HLc | Continuity | ||
| N | No Continuity | |||
| 4LLc | Continuity | |||
| 2WD/4WD Detection Switch | 2H | Continuity | ||
| 4H | No Continuity | |||
|
||||