Pinion Rotating Force
NOTE:
Pinion rotating force procedure is performed with rack and pinion assembly off vehicle and supported in soft-jawed vise.
Using adapter and torque wrench, measure rotating force while turning pinion gear through one complete rotation within 4-6 seconds. See PINION ROTATING FORCE SPECIFICATIONS and PINION ROTATING FORCE ADAPTER tables. If rotating force is not within specification, adjust end plug (rack support cover), and recheck rotating force. Tighten locking nut to 36-51 ft. lbs. (49-69 N.m).
PINION ROTATING FORCE SPECIFICATIONS
| Application | INCH Lbs. (N.m) |
|---|---|
| Eclipse | 5-11 (.6-1.3) |
PINION ROTATING FORCE ADAPTER
| Application | Tool No. |
|---|---|
| Eclipse | CT-1108 Or MB991006 |