LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1993 >> 3000GT Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Controls - Remove/Install/Overhaul) >> Fuel System >> Turbochargers >> Installation

Fuel System: Turbochargers: Installation

WARNING: This page is about a different car, the 1994 Mitsubishi 3000GT and 1994 Dodge Stealth. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Before oil pipe flare nut (above turbocharger) is installed, pour clean engine oil into oil pipe installation hole of turbocharger. Ensure oil and air hoses are properly installed and securely clamped.
  2. Use new gaskets. Adjust accelerator cable (if necessary). Refill engine oil and coolant. Check for oil and coolant leaks. Tighten all bolts to specification. See TORQUE SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals