LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1992 >> Montero RS, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Component Testing >> Abs Power Relay

Abs Power Relay

  1. Remove ABS power relay. Relay is located behind radio. Disconnect relay connector. Using an ohmmeter, check for continuity between terminals No. 1 and 3. See Fig 1 . If continuity exists, replace relay.
  2. If continuity does not exist, check for continuity between terminals No. 2 and 4. If continuity exists, go to next step. If continuity does not exist, replace relay.
  3. Apply battery voltage to terminal No. 2, and ground terminal No. 4. Check for continuity between terminals No. 1 and 3. If continuity exists, relay is okay. If continuity does not exist, replace relay.
Fig 1: Testing ABS Power Relay
G91G08042Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals