LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1992 >> Montero LS >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - V4AW2 >> Component Disassembly & Reassembly >> Overdrive Brake >> Reassembly

Overdrive Brake: Reassembly

  1. Lubricate and install oil seal rings on OD case. Ensure rings rotate smoothly after installation. Install NEW "O" rings on brake piston. Using hand pressure, carefully install brake piston into OD case.
  2. Install return springs into OD case. Install spring retainer and snap ring. Ensure end gap of snap ring is not aligned with cutout portion of OD case. Ensure snap ring is inserted in its groove.
  3. Install No. 6 bearing race, No. 5 thrust bearing and No. 4 bearing race on OD planetary ring gear. Install OD planetary ring gear assembly into OD case.
  4. Install cushion plate into OD case with rounded side inward. Install discs and plates in appropriate order. Install flange with rounded edge facing upward. Install snap ring. Ensure end gap of snap ring is not aligned with cutout portion of OD case. Recheck OD brake clearance. If measurement is not as specified, check for incorrect reassembly of components.
scientia non olet · About LEMON Manuals