LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1992 >> Montero LS >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Component Testing >> Idle Switch & Throttle Position Sensor >> Throttle Position Sensor (1992)

Throttle Position Sensor (1992)

  1. Disconnect sensor connector. Resistance between terminals No. 1 and 4 should be 3500-6500 ohms. Use an analog ohmmeter to measure resistance between terminals No. 1 and 3. SeeFigure -Figure .
  2. Slowly open throttle valve to wide open throttle. Resistance should change smoothly as throttle is opened. Replace throttle position sensor if it does not test correctly.
scientia non olet · About LEMON Manuals