LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1991 >> Precis Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Emission Systems & Sub-Systems >> Fuel Evaporation >> Purge Control Solenoid Valve

Purge Control Solenoid Valve

  1. Disconnect Red-striped vacuum hose from purge control solenoid valve and detach harness connector. Connect vacuum pump to nipple where Red-striped vacuum hose was present. Apply vacuum and battery voltage to valve. With battery voltage applied, vacuum should release. With battery voltage disconnected, vacuum should hold.
  2. Using an ohmmeter, measure resistance between solenoid valve terminals. At 68°F (20°C), resistance should be 36-44 ohms.
scientia non olet · About LEMON Manuals