LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1991 >> Eclipse Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal & Installation >> Wheel Speed Sensor >> Installation

Wheel Speed Sensor: Installation

  1. Install speed sensor bracket if removed. Sensor mounting brackets are not interchangeable from side-to-side. Each bracket is stamped with an "FR" indicating front bracket and an "R" or "L" to indicate left or right.
  2. Temporarily install speed sensor. Route speed sensor wiring harness in its original location, and ensure no twist exists in harness. Adjust wheel speed sensor-to-rotor gap. See WHEEL SPEED SENSOR under ADJUSTMENTS  . To complete installation, reverse removal procedure.


  1. Install sensor bracket if removed. Sensor mounting brackets are not interchangeable from side-to-side. Each bracket is stamped with an "R" or "L" to indicate left or right.
  2. Temporarily install speed sensor. Route speed sensor wiring harness in its original location, and ensure no twist exists in harness. Ensure sensor harness is not in contact with trailing arm.
  3. Adjust wheel speed sensor-to-rotor gap (if possible). See WHEEL SPEED SENSOR under ADJUSTMENTS  . On all models, reverse removal procedure to complete installation.
scientia non olet · About LEMON Manuals