Abs Power Relay Test
- Remove ABS power relay from left cowling. Ground terminal No. 4 and supply battery voltage to terminal No. 2. Using a DVOM, check for continuity between terminals No. 1 and 3. See Fig 1
. Continuity should be present.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
- Remove battery voltage from terminal No. 2 and recheck for continuity between terminals No. 1 and 3. Continuity should not be present. Remove ground connection from terminal No. 4. Using a DVOM, check for continuity between terminals No. 2 and 4. Continuity should be present. If DVOM readings are not as specified, replace ABS power relay.