Trouble Shooting

Verify customer complaint by operating power-window system. Visually inspect for obvious signs of mechanical and electrical damage. Inspect for blown fuses and damaged relays. Inspect for loose or corroded connections, damaged wiring harnesses and/or switches. Check for a broken or partially broken wire inside insulation, which could cause system malfunction but prove good in a continuity/voltage check with system disconnected. Ensure any aftermarket electronic equipment is properly installed. If fault is found, repair as necessary. If no fault is found, perform test on suspect components. See COMPONENT TESTING  .

1. Neither the left nor right door window glass can be opened. The turn signal also does not operate.
   • Check the fuse.
2. The turn signal operates.
   • Check the power window relay. Check power window main switch and sub switch.