Speedometer Cable: Installation

WARNING: This page is about a different car, the 1991 Mitsubishi Pickup, 1991 Mitsubishi Montero, and 1991 Dodge Ram 50. However, it is still accessible from the selected car via links, so may be relevant.

Install new cable. Insert cable until stopper seats properly in groove on rear of speedometer housing. Pull speedometer cable through firewall grommet until cable marking is visible from engine compartment. Install adapter onto speedometer cable (if equipped). Install instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. Install cable onto transmission or transaxle. Check for proper operation.

NOTE: An improperly installed cable can cause fluctuating meter, noise or damaged harness inside instrument panel.