LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1990 >> Eclipse Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Transmission Throttle Control Adjustment >> Pickup

Transmission Throttle Control Adjustment: Pickup

  1. Ensure engine idle is adjusted correctly. Ensure throttle lever and throttle cable bracket are not bent.
  2. Measure gap between inner cable stopper and cover end with throttle valve fully open. See Fig 1.
    Fig 1: Adjusting Throttle Cable (Pickup)
    G90J02447Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. If gap is not within 2.05-2.09" (52.1-53.1 mm), adjust inner cable bracket. Tighten cable bracket bolts to 96-112 INCH lbs. (10-14 N.m).
scientia non olet · About LEMON Manuals