Fuel Gauge Simple Test

Disconnect fuel sending unit connector wire in luggage compartment, cargo space or at tank unit. Connect a 12-volt, 3.4-watt bulb to harness side of connector, between power terminal and ground. To locate Test Point, See appropriateFig 1 -Fig 7 . Turn ignition switch to ON position. Ensure test bulb flashes (or stays on) and fuel gauge needle moves.

Fig 1: Fuel Gauge Test Connection ID (Mirage)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Fuel Gauge Test Connection ID (Eclipse, Galant & Sigma)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Fuel Gauge Test Connection ID (AWD Eclipse & Galant)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 4: Fuel Gauge Test Connection ID (Pickup)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 5: Fuel Gauge Test Connection ID (Van/Wagon)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 6: Fuel Gauge Test Connection ID (Montero 2.6)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 7: Fuel Gauge Test Connection ID (Montero 3.0)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.