LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1989 >> Precis Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Remove/Install/Overhaul >> Fuel System >> PFI Throttle Body >> Disassembly

PFI Throttle Body: Disassembly

Remove throttle position sensor. Remove idle speed control motor. Remove throttle bracket and connector bracket (if equipped). Remove idle position switch and adjusting nut.

NOTE: Do not remove throttle valve. Do not use cleaning solvents on throttle position sensor, idle speed control motor or idle position switch.
scientia non olet · About LEMON Manuals