Front Wiper Motor - Low Speed Operation Check
- On all models except Precis, disconnect wiring connector from wiper motor. Connect battery voltage to wiper motor connector and ensure wiper motor operates.
- Check low speed operation by connecting battery voltage to one connector terminal and ground to other connector terminal. See LOW SPEED OPERATION CHECK TERMINAL NUMBERS
for terminal numbers. SeeFig 1
.LOW SPEED OPERATION CHECK TERMINAL NUMBERS
Model Ground Terminal No. Voltage (+) Terminal No. Galant SeeFig 2 SeeFig 2 Mirage SeeFig 2 SeeFig 2 Montero 3 1 Pickup 1 3 Sigma 6 1 Starion 1 4 Van/Wagon Ground 1 - On Precis models, the wiper/washer switch must be checked for continuity between the following terminals:
- With switch in "OFF" position, continuity must be present between "LO" and "P".
- With switch in "INT" position, continuity must be present between "LO", "P", "INT" and "Ew".
- With switch in "LO" position, continuity must be present between "LO" and "Ew."
- With switch in "HI" position, continuity must be present between "HI" and "Ew".
- With switch in "WASHER" position, continuity must be present between "Ew" and "W".