LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1987 >> Precis Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Body - Lancer Evolution) >> Sunroof >> Specification(S) >> General Information >> Sunroof Timer Function

Sunroof Timer Function

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

The sunroof ECU (integrated into the sunroof motor assembly) receives the ignition switch (IG1) signal transmitted by ETACS-ECU. If the ignition switch (IG1) signal turns OFF, the sunroof ECU allows the sunroof switch to open/close (timer activation) the sunroof for approximately 30 seconds. During the timer operation, if the driver's or passenger's door open is detected from the door switch signal transmitted by ETACS-ECU, the sunroof timer function stops at this time.

Fig 1: Identifying Sunroof Timer Blinking Pattern
G05384199Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.