Section 14 (Exterior - Lancer Evolution): Specification(S): Adhesive
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
ADHESIVE SPECIFICATION
| Item |
Specification |
| Front three-diamond mark mm (in) |
Adhesive tape: Double-sided tape 0.6 (0.02) thickness |
| Side air dam mm (in) |
Adhesive tape: Double-sided tape 4 (0.16) width and 1.2 (0.05) thickness
Adhesive tape remover: 3M™ AAD Part number 8906 or equivalent |