Removal & Installation
WARNING: This page is about the Montero Base, which is a different variant/trim than selected.
TRANS ID - AISIN WARNER
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| In-Line4 | | 7.2 | | C |
| Combination Procedure: CONVERTER DRIVE PLATE: Replace: |
| | 0.1 | | C |
| Combination Procedure: FRONT PUMP: Replace: |
| | 0.2 | | B |
| Combination Procedure: FRONT PUMP O-RING: Replace: |
| | 0.6 | | B |
| Combination Procedure: FRONT PUMP SEAL: Replace: |
| | 0.4 | | B |
| Combination Procedure: TORQUE CONVERTER: Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | | C |
TRANS ID - TORQUEFLITE, MA-904A
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 7.2 | | C |
| Combination Procedure: CONVERTER DRIVE PLATE: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: FRONT PUMP SEAL: Replace: |
| | 0.2 | | B |
| Combination Procedure: KICKDOWN BAND: Remove & Replace: |
| | 2.0 | | A |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.4 | | B |
| Combination Procedure: REACTION SHAFT &/OR BUSHING: Remove & Replace: |
| | 0.5 | | A |
| Combination Procedure: REVERSE BAND: Remove & Replace: |
| | 2.0 | | A |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | | C |