Ignition System - Electronic: Overhaul: Reassembly

Reverse removal procedure. Inspect cap and rotor for cracks and deposits on inside surfaces. Ensure no metallic dust or filings adhere to breaker assembly, and it is clean prior to reassembly. Use new distributor drive gear roll pin.

Fig 1: Exploded View of Mitsubishi Distributor Used With 1.5L, 2.0L & 2.4L Engines

Fig 2: Exploded View of Mitsubishi Distributor Used With 1.6L & 2.6L Engines Note location of governor springs for reassembly.

Fig 3: Exploded View of Mitsubishi Distributor Used With 1.8L Engine Note location of governor springs for reassembly.