LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1983 >> Cordia Base >> Repair and Diagnosis >> Steering >> Steering Column >> Overhaul >> Steering Column >> Reassembly

Steering Column: Reassembly

  1. Install steering shaft in steering column and install snap ring. Install and tighten column tube bracket bolt until bolt head snaps off.
  2. Fill bearing with grease and install in end of steering column. Make sure bearing is fully seated. Align steering lock with column boss. Use ignition key to make lock function, making sure that steering lock is operational. Tighten lock retaining screw.
NOTE: Steering lock retaining screws are special one way design.
scientia non olet · About LEMON Manuals