Section 129 (Engine Electrical System - Repair (F57))
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
- 12 00 Engine Electrical System
- 12 12 Ignition Wire, Spark Plugs
- 12 13 Ignition Coil
- 12 14 Electronic Switching Or Control Units
- Replacing crankshaft pulse sensor (B36, B38, B46, B48) (Cooper Convertible)
- Replacing pulse sensor on intake camshaft (B36, B38) (Cooper Convertible)
- Replace pulse sensor on exhaust camshaft (B36, B38) (Cooper Convertible)
- Replacing control unit (DME) (Cooper Convertible)
- Replacing the knock sensor (B36, B38) (Cooper Convertible)
- Programming the control unit (DME/DDE) (Cooper Convertible)
- Replacing pulse sensor on intake camshaft (B48, B46) (Cooper S Convertible)
- Replace pulse sensor on exhaust camshaft (B48, B46) (Cooper S Convertible)
- Replacing the knock sensor (cylinder 1. and 2.) (B48, B46) (Cooper S Convertible)
- Replacing knock sensor (cylinder 3. and 4.) (B48, B46) (Cooper S Convertible)
- 12 31 Alternator With Drive And Attachment
- 12 41 Starter With Attachment
- 12 42 Starter Line
- 12 51 Engine Wiring Harness
- Replacing wiring harness section for injectors and ignition coils (B38) (Cooper Convertible)
- Replacing wiring harness section for Valvetronic servomotor (B38) (Cooper Convertible)
- Replacing the engine sensor system module 1 wiring harness section (B36, B38) (Cooper Convertible)
- Replacing the engine sensor system module 2 wiring harness section (B36, B38) (Cooper Convertible)
- Replacing the wiring harness section for the injectors and ignition coils (B48, B46) (Cooper S Convertible)
- Replacing wiring harness section for Valvetronic servomotor (B48, B46) (Cooper S Convertible)
- Replacing the engine sensor system module 1 wiring harness section (B48, B46) (Cooper S Convertible)
- Replacing the engine sensor system module 2 wiring harness section (B48, B46) (Cooper S Convertible)
- Removing and installing the wiring harness - section for the supply unit module (B48, B46) (Cooper S Convertible)
- 12 61 Oil Pressure, Oil Temp, Oil Level Check
- 12 63 Switch And Relay