Fuel System - Repair -- Cooper (F54)

• 13 31 Fuel Pressure Check
  • Checking fuel delivery pressure
• 13 51 High-Pressure Pump
  • Removing and installing/replacing the high-pressure pump
• 13 53 Fuel Injectors, Fuel Rail, Fuel Line, Pressure Sensor
  • Clean the cylinder head in the area of the injectors with sandy/dusty contamination
  • Removing and installing/replacing feed line (B36 and B38 engines) (Cooper Clubman base)
  • Removing and installing/replacing rail (B36 and B38 engines) (Cooper Clubman base)
  • Removing and installing/replacing pressure line between rail and high pressure pump
  • Remove and install all injectors in the injection system (B36 and B38 engines) (Cooper Clubman base)
    • REP-TAT-P-1353-01 Remove injector
    • REP-TAT-P-1353-02 Install injector
      • Notes
      • REP-TAT-P-1353-25 Reset ultra-small quantity adaptation
  • Removing and installing/replacing all injectors (B36 and B38 engines) (Cooper Clubman base)
  • Replacing the rail pressure sensor (B36 and B38 engines) (Cooper Clubman base)
  • Removing and installing/replacing feed line (B48 and B46 engines) (Cooper Clubman S and JCW)
  • Removing and installing/replacing rail (B48 and B46 engines) (Cooper Clubman S and JCW)
  • Remove and install all injectors in the injection system (B48 and B46 engines) (Cooper Clubman S and JCW)
    • REP-TAT-P-1353-01 Remove injector
    • REP-TAT-P-1353-02 Install injector
      • Notes
      • REP-TAT-P-1353-25 Reset ultra-small quantity adaptation
  • Removing and installing/replacing all injectors (B48 and B46 engines) (Cooper Clubman S and JCW)
  • Replacing the rail pressure sensor (B48 and B46 engines) (Cooper Clubman S and JCW)
• 13 54 Throttle Body
  • Removing and installing/seal throttle body
• 13 62 Coolant Temperature Sensor, Mass Airflow Sensor, Boost Pressure Sensor
  • Replacing the coolant temperature sensor
  • Remove and install/replace hot film air mass meter
  • Replacing boost pressure sensor (upstream of throttle valve)
  • Replacing the boost pressure sensor (on the intake system)
• 13 71 Intake Silencer
  • Removing the acoustic cover
  • Remove and install intake filter housing
    • REP-TAT-P-1371-01 Removing intake silencer housing
    • REP-TAT-P-1371-02 Installing intake silencer housing
  • Removing and installing/replacing intake silencer housing
  • Remove intake manifold for intake filter housing
  • Remove clean air pipe (B36 and B38 engines) (Cooper Clubman base)
  • Remove clean air pipe (B48 and B46 engines) (Cooper Clubman S and JCW)
• 13 72 Engine Air Filter
  • Replacing air filter insert
• 13 90 EVAP Canister Purge Valve
  • Replace the tank vent valve