1362 ENGINE SENSORS (Cooper base)
1362 TIGHTENING TORQUE OVERVIEW
| Boost pressure sensor for intake plenum | ||
| Screw TS6x20 | Tightening torque | 5 Nm |
| Boost pressure sensor to throttle body | ||
| TS5x20 | Tightening torque | 5 Nm |
| Crankshaft sensor to housing cover | ||
| Tightening torque | 4.6 Nm | |
| Differential pressure sensor to holder | ||
| screw | Tightening torque | 4 Nm |
| Hot film air-mass meter to intake filter housing | ||
| Screw TS4x16 | Tightening torque | 1.5 Nm |
| Lambda oxygen sensor | ||
| Tightening torque | 50 Nm | |
| Oxygen sensor monitor | ||
| Tightening torque | 50 Nm | |
| Pressure line on catalytic converter | ||
| Coupling nut | Tightening torque | 20 Nm |
| Temperature sensor on the crankcase | ||
| M6x18 screw | Tightening torque | 8 Nm |