Section 139 (Steering And Wheel Alignment - Repair (F57))
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
- 32 00 Steering, Measurement
- Additional work for camber correction (Cooper Convertible)
- General chassis definitions (Cooper Convertible)
- General information and definitions (Cooper Convertible)
- Identification of suspension without label (Cooper Convertible)
- KDS data statuses (Cooper Convertible)
- Notes and specifications for the replacement of the steering gear, steering column and the steering shaft following accident damage (Cooper Convertible)
- Performing rim runout compensation (Cooper Convertible)
- Shifting vehicle into design position (Cooper Convertible)
- Shifting vehicle into normal position (Cooper Convertible)
- Test conditions for chassis/wheel alignment check (Cooper Convertible)
- KDS chassis/wheel alignment check with vehicle load up to design position (Cooper Convertible)
- Kinematics Diagnosis System wheel alignment with ride height measurement without loading the vehicle (Cooper Convertible)
- Adjusting toe-in on front axle (Cooper Convertible)
- Adjusting rear axle (Cooper Convertible)
- 32 11 Steering Gear, Mechanical
- 32 13 Steering Gear With Servo Device
- 32 21 Steering Column Stalk, Tie Rod, Steering Damper
- 32 31 Steering Column
- Removing and installing/replacing steering column shroud upper section (Cooper Convertible)
- Remove and install/replace lower part of steering column shroud (Cooper Convertible)
- Removing and installing/replacing lower part of steering shaft (Cooper Convertible)
- Removing and installing/replacing steering column (Cooper Convertible)
- 32 33 Steering Wheel
- 32 34 Airbag And Steering Wheel For Airbag