| Air Conditioning |
| Service |
Refer to the "Fluid Capacities" tab for the selected vehicle. |
| Torque |
TIGHTENING TORQUES |
| Axle Nut/Hub Nut |
FRONT AXLE - TIGHTENING TORQUES
REAR AXLE - TIGHTENING TORQUES |
| Battery |
BATTERY |
| Brakes |
| Bleeding Sequence |
RR, LR, RF, LF |
| Disc Brakes |
FRONT BRAKES
REAR BRAKES |
| Torque |
TIGHTENING TORQUES |
| Charging |
| Generator |
REMOVING AND INSTALLING OR REPLACING ALTERNATOR (B36, B38) (COOPER CONVERTIBLE)
REMOVING AND INSTALLING OR REPLACING ALTERNATOR (B48, B46) (COOPER S CONVERTIBLE) |
| Torque |
TIGHTENING TORQUES |
| Drive Belts |
| Adjustment |
NA |
| Belt Routing |
REPLACING DRIVE BELT FOR ALTERNATOR (B36 ENGINE) (COOPER BASE)
REPLACING DRIVE BELT FOR ALTERNATOR (B48 AND B46 ENGINE) (COOPER S AND JOHN COOPER WORKS) |
| Engine Cooling |
| General Service Specifications |
Refer to the "Fluid Capacities" tab for the selected vehicle. |
| Radiator Cap Pressure |
COOLANT, COOLING SYSTEM TEST |
| Thermostat R & I |
REMOVING AND INSTALLING/REPLACING COOLANT THERMOSTAT (B36 ENGINE) (COOPER BASE)
REMOVING AND INSTALLING/REPLACING COOLANT THERMOSTAT (B48 AND B46 ENGINE) (COOPER S AND JOHN COOPER WORKS) |
| Water Pump R & I |
REMOVING AND INSTALLING/REPLACING THE COOLANT PUMP (B36 ENGINE) (COOPER BASE)
REMOVING AND INSTALLING/REPLACING COOLANT PUMP (B48 AND B46 ENGINE) (COOPER S AND JOHN COOPER WORKS) |
| Engine Mechanical |
| Compression |
ENGINE IN GENERAL |
| Oil Pressure |
CHECKING ENGINE OIL PRESSURE (B36 ENGINE) (COOPER BASE)
CHECKING ENGINE OIL PRESSURE (B48 AND B46 ENGINE) (COOPER S AND JOHN COOPER WORKS) |
| Overhaul |
TECHNICAL DATA |
| Torque |
TIGHTENING TORQUES |
| Fluid Specifications |
See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. |
| Flywheel/Flex Plate Torque |
1122 FLYWHEEL |
| Fuel System |
| Fuel Filter Location |
In tank, integrated with fuel pump |
| Fuel Filter R & I |
REMOVING AND INSTALLING/REPLACING THE DELIVERY UNIT (51 L GASOLINE) (COOPER)
REMOVING AND INSTALLING/REPLACING THE DELIVERY UNIT (61 L GASOLINE) (COOPER) |
| Pressure Release Procedure |
NA |
| Pressure Specification |
specification not available, refer to "fuel pressure test procedure" below |
| Fuel Pressure Test Procedure |
CHECKING FUEL DELIVERY PRESSURE (B36, B38, B46, B48) |
| Ignition |
| Firing Order |
FIRING ORDER & CYLINDER IDENTIFICATION |
| Ignition Wires (Routing) |
Coil On Plug |
| Spark Plug |
| Type |
12 12 0 040 551 |
| Gap |
NA |
| Torque |
17 ± 2 ft. lbs. (23 ± 3 Nm) |
| Starting |
| Starter |
REMOVING AND INSTALLING/REPLACING STARTER MOTOR |
| Torque |
TIGHTENING TORQUES |
| Wheel Alignment |
| Adjustment Specifications |
TECHNICAL DATA |
| Torque |
TIGHTENING TORQUES |
| Wheel & Tire |
| Wheel Lug Nut Torque |
140 Nm |