1112 Cylinder Head With Lid
B36 ENGINE (COOPER BASE):
TIGHTENING TORQUE SPECIFICATION (CYLINDER HEAD WITH CYLINDER HEAD COVER)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Cylinder head bolt | B32S15M0/B38M0/U0/B36M0 | M11 x 1.5 x 188 11.9 Replace screws. |
1. Tightening torque 2. Angle of rotation 3. Angle of rotation |
30 Nm 90° 180° |
| 2AZ Cylinder head bolt to timing case cover | B32S15M0/B38M0/U0/B36M0 | M8x45 | 20 Nm | |
| 3AZ Cylinder head cover to cylinder head. | B32S15M0/B38M0/U0/B36M0 | M6 | 1. Tightening torque 2. Tightening torque |
8 Nm 11 Nm |
| 4AZ Securing eye to cylinder head. | B32S15M0/B38M0/U0/B36M0 | M8 | 22 Nm | |
| 5AZ Chain tensioner to cylinder head. | B32S15M0/B38M0/U0/B36M0 | 1. Tightening torque 2. Angle of rotation |
20 Nm 30° |
|
B46 AND B48 ENGINES (COOPER S AND JCW):
11 12 CYLINDER HEAD WITH CYLINDER HEAD COVER - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Cylinder head bolt Observe the property class! |
B46M0/B48M0 | M11x1.5x188 11.9 | 1. Tightening torque 2. Angle of rotation 3. Angle of rotation |
30 Nm 90° 180° |
| B42S2000/B46O0/B48O0 | M11x1.5x188 13.9 Replace screws. |
1. Tightening torque 2. Angle of rotation 3. Angle of rotation |
50 Nm 180° 180° |
|
| 2AZ Cylinder head bolt to timing case cover | B42S2000/B46M0/O0/B48M0/O0 | M8x40 | 20 Nm | |
| 3AZ Cylinder head cover to cylinder head. | B42S20O0/B46M0/O0)/B48M0/O0 | M6 | 1. Tightening torque 2. Tightening torque |
8 Nm 11 Nm |
| 4AZ Securing eye to cylinder head. | B42S2000/B46M0/O0/B48M0/O0 | M8 | 22 Nm | |
| 5AZ Chain tensioner to cylinder head. | B42S20O0/B46MO/O0/B48M0/O0 | 1. Tightening torque 2. Angle of rotation |
20 Nm 30° |
| Cylinder head on device | ||
| M 10X90x1.5 | Tightening torque | 30 Nm |
| Flange on assembly jig | ||
| M14X30 | Tightening torque | 135 Nm |
| Special tool 00 2 320 to special tool 00 2 300 | ||
| M14X95 | Tightening torque | 130 Nm |