84 10 700 Removing and installing/replacing base plate

WARNING: This page is about a different variant/trim than selected.

Special tools required:

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Removal:

Unclip the cable clip (1) and expose the access lines (2, 3) up to the base plate.

Fig 1: Locating Access Lines Cable Clip

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary press button (1) and remove cover (2).

Fig 2: Locating Cover Removing Button

Courtesy of BMW OF NORTH AMERICA, INC.

Disengage the base plate (1) from the center armrest on both sides with special tool 00 9 340 .

Fig 3: Disengaging Base Plate From Center Armrest On Both Sides With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Turn base plate (1) away to the side.

Release screws from upper housing section (2).

Fig 4: Turning Base Plate

Courtesy of BMW OF NORTH AMERICA, INC.

Raise upper housing section (1) and release cable strap if necessary.

Unlock and disconnect cable (2) to fan.

Unclip all the cables on the underside of the upper housing section (1).

Feed out all cables and remove base plate.

Fig 5: Removing Upper Housing Section Cable Strap

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Feed in all cables and base plate.

Clip in all the cables on the underside of the upper housing section (1).

If necessary, secure cable to upper housing section (1) with cable strap.

Connect cable (2) to fan.

Fig 6: Removing Upper Housing Section Cable Strap

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten screws on upper housing section (2).

Join base plate (1) in upper housing section (2).

NOTE: Ensure base plate (1) is correctly fitted and engaged in upper housing section (2).

Fig 7: Turning Base Plate

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, join cover (2) in base plate (1).

Fig 8: Locating Cover Removing Button

Courtesy of BMW OF NORTH AMERICA, INC.

Join the access lines (2, 3) to the center armrest and clip in the cable clip (1).

NOTE: Make sure connecting lines (2, 3) are correctly routed.

Fig 9: Locating Access Lines Cable Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: