Removing and installing (replacing) Touchbox controller control unit (Cooper)

Preliminary work needed: 

• Remove left rear seat backrest SIDE SECTION .

Removal: 

Unscrew the screws (1).

Disconnect connector (2).

Remove control unit (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Position control unit (3).

Tighten down screws (1).

Connect connector (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Attach left rear seat backrest SIDE SECTION .

Replacement: 

Perform vehicle PROGRAMMING AND CODING .