61 13... Circular plugs, 4-, 7-, 10- 12-, 25-pin, System D1.5/D2.5

Special tools required:

Insert special tool with suitable connection side in connector and twist approx. 3° counter-clockwise.

Fig 1: Inserting Special Tool With Suitable Connection Side In Connector

Courtesy of BMW OF NORTH AMERICA, INC.

The connector is locked down if retaining lug (3) is located in locking groove (2).

Fig 2: Locating Retaining Lug In Locking Groove

Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 press back snap-in hooks (4) of corresponding contact and pull out cable with contact.

Fig 3: Pressing Back Snap-In Hooks Of Corresponding Contact

Courtesy of BMW OF NORTH AMERICA, INC.