Center console operating facility
The cameras are activated by a button in the center console operating facility. The camera images are displayed on a split screen in the central information display (CID). The system is automatically switched off above a speed of 15 km/h. The reversing camera is also activated by a button in the center console operating facility. Conditions required for switch-on, see Owner's Handbook.
Example BMW 7-Series
| Item | Explanation |
|---|---|
| 1 | Center console operating facility |
| 2 | DTC button |
| 3 | Drive dynamics control switch |
| 4 | Button for bumper camera |
| 5 | PDC button with function indicator light as well as button for reversing camera |
| 6 | 4 pin plug connection |
| 7 | six pin plug connection |
The center console operating facility has 2 plug connections (6-pin and 4-pin). Electrical connections exist between the buttons in the center-console control panel and various control units:
- Bumper camera button and PDC button to the controller (CON)
- Driving dynamics control switch and DTC button to the Integrated Chassis Management (ICM)
NOTE:
New update procedure!
The center console operating facility is only still connected to the ICM for the next Integrated Chassis Management (ICM) generation.